need help with bus drop spindles

Hey guys, i picked up some flipped drop spindles from the samba for my 66 bus, my bus has stock beam and brakes, not a clue how to put the spindles on, anyone can help me out with it??? Joe is leaving, so i need to find someone else. I can drive down and stay at bills some weekend and we can do it. let me know.

Chuck

whoever does it remember there are some measurements on the spindle to trailing arms that need to be made. Other than that it's bolts.

I don't do weekends but, the shop is open 9-6 m-f.

hey thanks man, how long would it take ur shop to do the job, also what is it about the king and link pin that i hear sometimes needs to be rebuilt what does that entail??

chuck

Copper1982 wrote:hey thanks man, how long would it take ur shop to do the job, also what is it about the king and link pin that i hear sometimes needs to be rebuilt what does that entail??

chuck

If they are flipped the king pins should be good. the link pins we can use the better of yours or the replacement ones.
2-3 hours. depends on any hassles. Normal shouldn't take but, 45 min - 1 hour a side.